For the second time, not sure what I saw, but it was entertaining

Need to take focus to document and reflect on events.

Here is a 90 deg turn with just throttle articulation.

Hiked at Mingo Creek and tested out Garmin instinct watch. Had hard time locating trail. Walked a field and awesome pine Grove before ending up near paved trail. We did hit a trail to a spring that was warmer than expected for the air temp for the week.

Found someone’s lost boomerang and sparked interest to aquire a new skill.

i finally found a printer this year that printed on gaitor board for me of photo mosaic.

30x20in I think it was $44

iris scott is a bad ass finger painter. friend of mine has a print of hers in living room and made that into photo mosaic from thousands of pictures I have taken over the years.

The installation was to prevent oil being sent through the intake. 126k miles on the engine and increased boost from Vf48 upgrade increases tendency of blow by. This deletes simple ball bearing type pcv valve and puts heated tank that drains back oil collected and supplies clear oil free air to intake pre-turbo.
First challenge was to move cruise control module as I need to mount aos on these two bolts. 

C

Tool the unit off and trimmed the mounting bracket to use only one of three mounting points. Lowering the mounting to below aos.

The only real issue I had was the connection from aos to tmic crossover pipe was not long enough. The only documentation made it appear they swapped the valve cover and output port, this would not work for me. Purchased 2 ft of 1/2 hose and made it work. 

I watched this video 

Went to harbor freight and pick up dual action polisher metal polish and some 303

Taped off around light cleaning with window cleaner and dish pad and went at it. 

And after 

They turned out great will use this method again