-125k VF48 (2016 STi 1K miles)
-125k dark blues 565cc (cleaned and tested)
-125k Fuku turbo inlet (new)
-125k Prodrive 3 Port ebcs (used)
-125k Cosworth Phenolic Thermal Spacer 3mm (new)
-125k grimspeed uppipe / downpipe gaskets
-125k Subaru 807515712 Oil Drain Hose (turbo oil drain)
-125k Denso 234-9011 Air Fuel Ratio Sensor (upstream)
Intake removed, installed the inlet and injectors 
Vf48 turbo install 
one EJ makings
All buttoned up
Reuse, Repurpose, Recycle
This was just test one, image every 2 seconds 30 fps video = 22 seconds (25fps would be 26 sec)
I didn’t have chicken wire. Made this device from wire fence did have.. Tied up the holes with like 30yard of fishing line. Stay away birds. MINE!
The seeds now are like basketball size. It was soo tall before gravity over took
This is second plant. The bumblebees love it.
A local detour I took a time lapse of over the projects duration. This was over a couple months. Trimmed out nights and reduced down half the number of frames that much was not going on so that times like when laying the concrete platforms has more frames.
Tonight I randomly adventured for a second crack at welding. I had stack of disregarded 90 deg 16 gauge steel. Used a grinding cut off wheel to make 4 equal rectangles and 2 squares the short length the rectangles.
Created a spherical rectangle!
A nice weld for sake of progress
One that show the need to learn to adapt and overcome on poor welds.
I assume I can weld over and thicken it out. That’s the derived theory I’m going with.
FASTER Remix
for 2x slower version look here
This was taken over the span of 30 days. Taking 1 picture per minute (needed to use some scripting magic to reduce the images down).
In the process of working on a couple of electronics projects I have learned how to make things work on a bread board.
The make that mess into a board that will stack into the arduino.
Then make the board connect to input pins through a standard cable.
For about of month of real efforts notice the difference in what is possible.
