At this time since knew would require an alignment, so I went and purchased a new axle to replace one that was torn since I got the car. This would get all things that would knock the alignment out in one shot to save time.
In the process of installing that axle I found that the drivers side was torn again. But the bigger issue I ran into was the inner joint on the axle popped out and was not going back in without removing. but since it was now 3-5 inches longer, the axle would not come out of the hub!
I pulled the tie rod, then when separating the ball joint with pickle fork it ripped the crap out of the rubber boot. Domino effect got me good in this portion of the install in pulling the hub, to remove the axle. Even getting the ball joint out of the hub was task that took the technique of getting a bigger hammer.
This video is 3 days of images. two in a row, then the day the extra parts arrived. 1 image every 30 seconds, playback is 20 frames per second. The song is Smooth Criminal played by 2cellos
After 9 days of brewing I pulled the scoby, separated all but a cup of the mother then added two cups of grape juice for the second part of fermentation.
This part is sealed in sealed in KORKEN jars from ikea. This will produce the carbonated fizz in the brew. Will see how long this takes, read range is 1-7 days then refrigerate until you drink it.
I know what I am going to use this for, but the included instructions confused me, so I looked at the address on the business card. www.hydroclubusa.com
Would be interesting to see what this would do on early 90s Honda. Would kill a modern day engine.
The uncle Sam theme is the best part of the site. Not sure if will get any benefits with out proper tune of the caf. But this guy started his own business with a kit to mix hydrogen and gasoline to a car with a fuel cell. Weird that has been disproven in tests, but why not believe him. The devils advocate in the info on the site makes me curious 😉
I wanted this part to run a green hose on my engine to my brake Booster. This will restrict air flow in one direction and replace the check valve that is built in the OE hose. Thus making the brakes work.
I was impressed how this turned out. There was a serious amount of work to make this happen. This is made from recycling old computer floppy drives and hard drives with a dash of ingenuity
Got a nice hike in on the first day of June. We re-conned off the trail a little bit to find these falls. Low and behold we were not the first by the presence of the rock stack!
